5 Press or repeatedly until the color effect you want appears.
Note: Color effect selections include Auto Enhance, Sepia, Antique Grey, and Antique Brown.
6 Press .
Note: The selected color effect applies to all the photos you print until the active memory card or flash drive is
removed.
Related topics:
• “Using the control panel” on page 109
Using a PictBridge-enabled digital camera to control printing photos
You can connect a PictBridge-enabled digital camera to the printer, and use the buttons on the camera to select and
print photos.
1 Insert one end of the USB cable into the camera.
Note: Use only the USB cable that came with the digital camera.
2 Insert the other end of the cable into the PictBridge port on the front of the printer.
Warning: Do not touch the USB cable, any network adapter, or the printer in the area shown while actively
printing from a PictBridge-enabled digital camera. A loss of data can occur. Also, do not remove the USB cable
or network adapter while actively printing from a PictBridge-enabled digital camera.
Working with photos
93
To Next Page
Loading...
