Wait for the Network Card Reader dialog to appear.
6 Select the images you want to save.
7 Click Save.
8 Choose the folder where you want the selected images to be saved.
9 Click Save.
Related topics:
• “Inserting a memory card” on page 87
• “Inserting a flash drive” on page 88
• “Transferring photos from a memory device to the computer using the control panel” on page 95
• “Using the Network Card Reader” on page 129
Scanning images for editing
1 Make sure the printer is connected to a computer, and both the printer and the computer are on.
2 Load an original image facedown on the scanner glass.
3 From the Finder desktop, double-click the Lexmark 6500 Series folder.
4 Double-click the Lexmark 6500 Series Center icon.
5 From the “What is being scanned?” menu, choose Photo or Magazine or Newspaper.
6 From the “How will the scanned image be used?” pop-up menu, choose To be printed or To be viewed on
monitor/Web page.
7 From the “Send scanned image to” pop-up menu, choose a destination folder or application for your scanned
photo.
8 Select Prompt for multiple pages if you have several photos to scan.
9 Click Preview/Edit to open the Scan dialog and adjust settings.
From the Settings tab, you can select a preset scan setting, descreen magazine or newspaper scans, and reduce
background noise.
From the Adjustments tab, you can customize the settings as needed.
10 Crop photos, if needed. For more information, see “Cropping photos using the software” on page 49.
11 Click .
Working with photos
99
To Next Page
Loading...
