LG PREMTA201 - Page 40

40
Function
Product
Description Option
Air
Conditioner
Ventilation
Func. Control
During Grp.
Control
○
A function to select the operation
standards of the product in case of
group control.
Type 0: All indoor units connected work in
the same status. Only the standard
functions are available.
Type 1: All indoor units connected work
in the same status. The below
functions can be additionally used in
accordance with the functions of the
Master indoor unit.
– Wind direction
– Up and Down / Left and Right /
Comfort wind, Additional functions
– Power-saving cooling / Heater
/ Fan Auto, Up and Down wind
angle
– Entire control
Type 2: When it is operated by the wired
remote controller, all the indoor
units connected work in the same
status. When it is controlled by the
wireless remote controller, only the
indoor unit which has received the
command works. You can use all
the functions of the master indoor
unit.
Air Purify
○
A function to set whether to
additionally install after mass-
production or mount after removal
for the option units (air cleaning /
heater / humidication / elevation grill /
ventilation / sub heater).
Installed / Not installed
Heater Kit
○
Humidication
Kit
○
Elevation Grill
○
Ventilation Kit
○
Aux Heater
○
Refrigerant
Leak Sensor
○ ○
A function to set whether to install a
are fastening unit and welding unit
leak sensors on the indoor unit.
Installed / Not installed
IDU Address
Verication
○ ○
A function to check the address of
the indoor unit designated from the
outdoor unit.
-