Settings 126
headset jack. If this cable was not provided with your TTY phone, contact your TTY phone
manufacturer to purchase the connector cable.
Turn TTY Mode On or Off
1. Press > > System settings > Call > TTY mode.
2. Tap TTY Off to turn TTY mode off or tap TTY Full, TTY HCO or TTY VCO to set a TTY
mode.
To access the state Telecommunications Relay Service (TRS) for assistance with TTY calls:
■ Dial to reach an operator.
Note: In TTY Mode, your phone will display the TTY access icon. When enabled, TTY mode
may impair the audio quality of non-TTY phones connected to the headset jack.
WARNING: 9-1-1 Emergency Calling recommends that TTY users make emergency calls by
other means, including Telecommunications Relay Services (TRS), analog cellular, and landline
communications. Wireless TTY calls to 9-1-1 may be corrupted when received by public safety
answering points (PSAPs), rendering some communications unintelligible. The problem
encountered appears related to software used by PSAPs. This matter has been brought to the
attention of the FCC, and the wireless industry and the PSAP community are currently working
to resolve this.
Hearing Aids
Activate to turn on hearing aid compatibility.
1. Press > > System settings > Call.
2. Tap the Hearing aids checkbox to enable/disable the feature.
Proximity Sensor
You can access the proximity sensor through the Call Settings menu.
When receiving and making calls, this sensor automatically turns the backlight off and locks the
touch keypad by sensing when the phone is near your ear. This extends battery life and
prevents the touch keypad from activating unintentionally during calls.
To enable the Proximity Sensor:
1. Press > > System settings > Call.
2. Tap the Proximity Sensor checkbox to enable it. (A blue checkmark will appear.)
Save Unknown Numbers
You can set the phone to save the phone numbers not saved in Contacts yet.
To Next Page
Loading...
Need help?
General
