Phone Calls 33
In-call Options
While you‟re on a call, you will see a number of onscreen options. Touch an option to select it.
● Dialpad/Hide: Toggle the appearance of the onscreen keypad.
● End call: End the current call.
● Speaker: Route the phone‟s audio through the speaker (On) or through the earpiece
(Off).
Activate Speaker to route the phone‟s audio through the speaker.
Deactivate Speaker to use the phone‟s earpiece.
Warning: Because of higher volume levels, do not place the phone near your ear during
speakerphone use.
● Mute: Mute the microphone during an active call. Touch again to unmute the
microphone.
Note: If Mute is activated, the speaker mode is deactivated.
● Bluetooth: Route the phone‟s audio through a connected Bluetooth headset (On) or
through the speaker (Off).
When the call is routed to a Bluetooth and get out of the call screen, the current call
area shows the Bluetooth call icon ( ).
Note: The Headset button is activated to show the current call is routed to the connected
Bluetooth headset.
To route the current call back to the phone, touch Bluetooth to temporarily use the
phone. Touch it again to route the call back to the connected Bluetooth headset.
To Next Page
Loading...
Need help?
General
