Lighthouse ApexPortable Series - Page 126

Lighthouse ApexPortable Operating Manual
I-4 248083440-1 Rev 5
R
Raw 5-15
Real Time Clock
Setting 7-3
Realtime output 5-23
Register Map A-2
Remote
Data Retrieval 4-3, 5-36
Operation 5-36
Start 4-3
Stop 4-3
Remote Operation 5-36
Remote Run via LMS Software 4-3
Report Requirements 5-42
EU GMP 5-42
Reports
Class Level 5-45, 5-49
Operational room status 5-49
Printing 5-52
Unidirectional air flow 5-49
Routine Maintenance 6-1
RS485 Communications 4-2
RS485 converter 4-2
Running the Instrument Using MODBUS 7-1
S
Safety 1-1, 6-1
Electrostatic safety information 1-3
Laser safety information 1-1
Sample 5-12
Sample Setting 5-14
Count Mode 5-14
Sample Time 5-5, 5-13, 7-5
Sample Timing 5-12
Sample Volume 5-13
Save 7-2
SCAN MODE button
5-3
Security 5-29
Select Location 5-3, 5-6
Sensor Settings Registers A-2
Location 7-5
Sample Time 7-5
Using Sensor Setting Registers 7-4
Service 5-30
Service Indicator 5-5
Setting the Alarm Threshold Value 7-8, A-10
Setting the Real Time Clock 7-3
single record printing 5-53
Size Range 2-3, 2-4
Specifications
R5 2-3
Start/Stop Button 5-6
Storage Temp/RH 2-3, 2-4
Supported MODBUS Commands A-1
Supporting Software 2-3, 2-4
T
Text conventions i-i
Threshold Setup Registers 7-7, A-10
Setting the Alarm Threshold Value 7-8, A-
10
To disable alarming 7-7
To enable alarming 7-7
To enable the Alarm 7-6
Touch Screen Overview 5-2
Troubleshooting, Zero Count 6-2
U
Unidirectional air flow 5-49
USB 5-4
USB Device attached 5-4
USB Thermal Printer Option 2-2
Using the Counter
First Use 5-1
V
View Buffer
Alarm Status 5-38
Flow Status 5-38
Laser Status 5-38