Lighthouse ApexPortable Operating Manual
5-10 248083440-1 Rev 5
Go to the Settings screen and press Differential or Cumulative for the
data type. See Figure 5-12.
Figure 5-12 Settings Screen
CONFIG
(Configuration)
Screen
Press CONFIG on the MAIN screen to display the Configuration
screen as shown in Figure 5-13. This feature can be password-
protected.
Figure 5-13 Configuration Screen
DATA SETUP provides buttons to enable/disable particle channels, set
sample record parameters, sample settings, thresholds, enable/disable
alarms and clear the data buffer.
DEVICE SETUP provides buttons to configure the instrument’s date
and time, set the LCD contrast, adjust the instrument’s beep volume,
enable the instrument to AutoStart, set it to display only one channel of
data, enable real-time MODBUS output, set the instrument’s
communication address, enabling output on sample, enable password
restrictions and/or (with proper authorization) adjust service settings.
To Next Page
Loading...
