Operate the ApexPortable
248083440-1 Rev 5 5-9
Press the “Diff+Cuml Zoom” button as shown in Figure 5-9, right
frame, to enable the feature. This will display both differential and
cumulative data on the Zoomed View screen as shown in Figure 5-10.
Figure 5-10 Differential and Cumulative Data in Zoomed View
The buttons available after selecting Diff+Cuml Zoom are shown in
Figure 5-11. Their functions are the same as on single display screen.
Figure 5-11 Diff+Cuml Zoom Screen Button Actions
To return the instrument to the default single-column zoom view, return
to the MAIN Screen, press CONFIG, Options and deselect the
“Diff+Cuml Zoom” button. See Figure 5-9.
Press the MAIN button to return to the MAIN Screen or press BACK to
return to the previous level where the data type to be displayed on the
one-column Zoomed View screen is chosen.
DIFF
CUML
Data
Data
START or STOP counting
Display Cumulative / Differential data
Display Raw / Normalized particle data
Display ft
3
/ m
3
when configured
To Next Page
Loading...
