Lighthouse ApexPortable Operating Manual
5-2 248083440-1 Rev 5
10. If the instrument has been programmed with a delay before
starting the pump, it displays, “DELAY”.
11. If the instrument is in AUTO mode with cycles and a hold time,
“HOLDING” will display after each cycle and “FINISHED” will
display when all the cycles are complete.
12. Press the "STOP" button to stop the instrument before the cycles
are complete. "STOPPED" will display on the screen.
Touch Screen
Overview
The ApexPortable incorporates a unique touch screen interface, which
allows the user to easily view and configure the instrument to specific
needs and applications. Figure 5-1 shows the menu tree.
Menu Map
Figure 5-1 Menu Map
To Next Page
Loading...
