Lighthouse ApexPortable Series - Location

Lighthouse ApexPortable Operating Manual
5-34 248083440-1 Rev 5
LOCATION The ApexPortable allows up to 200 different locations and associated
alphanumeric labels.
Press the LOC button on the CONFIG screen to display the Select
Location screen as shown in Figure 5-54.
Figure 5-54 LOCATION Setup Screen
On the Select Location screen, the Location name can be selected by
pressing the UP or DOWN arrows or by pressing the location name on
the screen.
• When enabled, the AUTO INC option automatically selects the
next location after completing the current location’s number of
cycles. After initial power up, the default is AUTO INC OFF, as
shown in Figure 5-54.
•The
ApexPortable can be configured with a maximum of 200
Locations. Each location name may be a maximum of 8 characters.
• Locations associated with recipes are denoted by asterisks (*) to the
right of the location names.
• When selecting a location that has an associated recipe, the user is
prompted to load the recipe (as shown in Figure 5-55). If the user
chooses to not load the recipe, the location can be used with the
instrument current settings.
Figure 5-55 Location - Load Recipe