Lighthouse ApexPortable Series - Apexp5 Specifications

Lighthouse ApexPortable Operating Manual
2-4 248083440-1 Rev 5
ApexP5
Specifications
Table 2-2 ApexP5 Specifications
The manufacturer recommends that the Lighthouse instrument be
calibrated annually by a Lighthouse Certified Service Provider in order
to ensure the unit continues to perform within specifications and to
protect its warranty. For information about returning instruments for
calibration or service, visit our website www.golighthouse.com/RMA.
Size Range 0.5 - 10.0 μm
Channel Thresholds Standard 2-channel: 0.5μm, 5.0μm; 4-channel
0.5, 1.0μm, 5.0μm, 10.0μm
Flow Rate 1.0 CFM (28.3 LPM)
Counting Efficiency Meets ISO 21501-4
Data Storage Rotating Buffer, 3000 records
Light Source LASER diode
External Connections RS485 RJ45 (RS485 and RS232 data); DIN
(factory); Ethernet RJ45 (Ethernet data);
calibration port
Zero Count Level <1 count/5 minutes (per ISO 21501-4)
Max ISO Probe tubing Maximum tubing length to ISO = 16 feet
Calibration NIST Traceable
Communication Modes MODBUS ASCII; MODBUS RTU;
MODBUS TCP
Supporting Software LMS Pharma/Pro v7.3.1 or higher, LMS
Express 7.5 or higher
Operating Altitude Sea Level to 2000 meters (6561.66 feet)
Power Input
Requirements
24VDC ±5% @ 5.0A, 120W
Power Supply
Specifications
100-240VAC, 47-63Hz 1.4A input, 24VDC
5.0A 120W max output
Enclosure Stainless Steel, VHP compatible
Dimensions
9.00” (w) x 8.46” (h) x 6.21” (d) [22.86 x 21.49 x
15.77 cm]
Weight
10.0 lbs (4.54 kg)
Operating Temp/RH 50° F to 104° F (10° C to 40° C) / 20% to 95%
non-condensing at maximum 2000M altitude
Storage Temp/RH 14° F to 122° F (-10° C to 50° C) / Up to 98%
non-condensing