Lighthouse ApexPortable Series - Language; Comm; COMM Serial Settings

Lighthouse ApexPortable Operating Manual
5-24 248083440-1 Rev 5
Language
Press the LANGUAGE button to change the operating language as
shown in Figure 5-35.
Figure 5-35 Operating Language Screen
Press the button next to the desired language to change it from the
to the to enable. Press BACK to return to OPTIONS or MAIN
button to return to MAIN screen. The default language is English.
COMM
Press the COMM to set the ApexPortable communication mode.
Press the SERIAL’s toggle button to select SERIAL mode; press the
ETHERNET’s toggle button to select ETHERNET mode.
Figure 5-36 COMM-mode Setup Screens
Press the SERIAL button (Figure 5-36) to configure serial settings at
the screen shown in Figure 5-37.
COMM Serial Settings
When the
ApexPortable is connected to a SCADA data collection
system or other RS485 network, the
ApexPortable’s COMM address
Press
to select