Lighthouse ApexPortable Series - MAIN Screen

Operate the ApexPortable
248083440-1 Rev 5 5-3
MAIN Screen The MAIN screen provides a snapshot view of the status of the
instrument. The instrument can be powered by AC power or the
internal battery. When the instrument is using battery power, the
battery indicator will show the approximate level and percentage of the
battery charge remaining as shown in Figure 5-2.
Note:
The screen
examples in this chapter
are for reference, only. The
values displayed may not
be indicative of actual
values.
Figure 5-2 MAIN Screen - Battery Operation
Figure 5-3 MAIN Screen - AC Operation
When an AC-powered power supply is attached, the battery changes to
one with a lightening bolt. Its approximate capacity is displayed as a
percentage above the icon. See Figure 5-3.
The MAIN screen displays the following options and information:
• LOC: Displays the location that is currently being measured. Up to
200 alphanumeric locations can be configured.
• Location Select button: At the MAIN screen, displays an
Abbreviated Location Screen that allows a user to change location
before sampling without requiring use of the CONFIG screen and
any associated password.