EasyManua.ls Logo

Lighthouse ApexPortable Series - Page 34

Lighthouse ApexPortable Series
130 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Lighthouse ApexPortable Operating Manual
5-4 248083440-1 Rev 5
RECIPE button: Allows the user to view, load and unload recipes
that have been configured and saved in the recipe data base via an
Abbreviated Receipe Screen. To edit the recipe or to add or delete
recipes, use CONFIG, which can be password-protected, from the
MAIN screen (see Figure 5-47). The CONFIG password is not
required here.
Last-Sampled Record Print/USB Save: Indicates attached printer
or flash drive to be used to output the Last-Sampled Record
currently on the screen. Press the Print ICON to send to the
attached printer or USB ICON to send to flash drive. Restart will
clear the screen and nothing will be output.
Date/Time: Displays the current date and time.
Note:
Users can continue to
run samples and take counts
while the unit is plugged in.
Battery ICONs: Indicate that the instrument is being powered by
the rechargeable battery or its external power supply. The amount
of battery life left is depicted by the fill inside the battery icon and
the percentage above the icon. When the battery reaches 20%
charge, the ICON will start blinking and display a "BATTERY
LOW!" message. When it reaches 5% and the user tries to run a
sample, the large "Depleted" ICON shown on the left is displayed
and the unit will not run the pump until instrument is attached to the
external DC power supply for recharging.
While connected to the power supply, the battery icon changes to
indicate charging. See Figure 5-4.
Figure 5-4 Battery Levels, On-Battery and Charging
WARNING:
If the Air
Flow is insufficient, check
for and remove any
obstructions. If the issue
persists, turn the Apex off
and contact Lighthouse
Worldwide Solutions
technical support at 1-
800-
945-5905 (USA Toll Free)
or 1-541-770-5905
(Outside of USA)
.
Flow Status: When the instrument is COUNTING, the Flow ICON
(left of battery) appears and displays sufficient or insufficient flow.
•USB: Indicates that a USB printer or flash drive is attached.
Depleted Battery
Warning ICON
Full and
Depleted and
Charging
Charging
Depleted Full
On-Battery
Charging
InsufficientSufficient

Table of Contents

Related product manuals