Operate the ApexPortable
248083440-1 Rev 5 5-27
Make sure the values are correct. Incorrect values can cause the
ApexPortable to be lost on the network. It is suggested that site IT be
consulted for the IP and other values to ensure successful integration.
Typical Ethernet settings for most networks and the
ApexPortable are
a static IP, SUBNET empty/zeroes, and default Gateway is empty.
Lighthouse recommends using a static IP adress. .
OUTPUT
The Output Setup screens (Figure 5-42) provide formatting and other
options for printing to the optional USB printer or saving the data to a
USB flash drive. The port is shown in Figure 5-43.
Figure 5-42 Output Setup Screens, Printer and USB Set Up
Figure 5-43 USB Port Location
Printer Output
USB Output
Setup Screen
Setup Screen
USB Port for
Printer or
Flash Drive
Useage
To Next Page
Loading...
