Lighthouse ApexPortable Series - One Channel; One Second Realtime Modbus Output

Operate the ApexPortable
248083440-1 Rev 5 5-23
One Channel
If One Channel is enabled, only the first channel will be displayed on
the MAIN screen.
Note:
If the first channel
is disabled, the display and
zoomed data view will be
blank.
One Channel mode only affects how data is displayed on the MAIN
screen. When the instrument is in One Channel mode, data will
continue to be recorded, printed and downloaded for all channels. See
Figure 5-34.
Figure 5-34 One Channel Option Enabled
One Second Realtime Modbus Output
Set One Second Real-time MODBUS Output to change the
instrument’s settings to the following:
Note:
Alarming is not
available when One
Second Real-time
MODBUS Output is
enabled.
• Mode: AUTO
• Cycles: Zero
• Sample Time: One second
Note: If any setting (mode,
sample time, hold time, etc.)
is changed, the One Second
Real-time MODBUS Output
mode will be automatically
disabled.
• Hold Time: Zero seconds
• Cumulative/Differential: Cumulative (CUML)
• Raw/Normalized: Raw
When counting, the MAIN Screen will update continuously and data
will not be recorded in the data buffer.