Operate the ApexPortable
248083440-1 Rev 5 5-35
• If a recipe is loaded and a location is selected that is not associated
with a recipe, the user is prompted to unload the current recipe. If
the user chooses to keep the loaded recipe, the location will adopt
the current recipe settings.
To edit a location name, press the EDIT button to display the Edit
screen shown in Figure 5-56.
Figure 5-56 LOCATION Name Edit Screen
• Enter the name of the location using the alphanumeric and
underscore keys.
• Press the ERASE button to erase the last character typed, if needed.
• Press ENTER when done.
• Use the Arrow keys to go to the next location to be edited and press
the EDIT button. Continue in the same way to edit as many
Locations as desired.
Press the BACK button to return to the CONFIG screen or the MAIN
button to return to the MAIN screen.
Press the AUTO INC button to enable automatic incrementing to the
next location after completing the number of cycles for the current
location. See Figure 5-57. This eliminates the need for the user to
manually change the location.
Figure 5-57 Auto Increment Prompt
To Next Page
Loading...
