Lightware MMX2 Series

 MMX2 series – User's Manual 33

HDMI Video Output
Port properties window of the HDMI video output
Available settings and tools
General
Port name
The name of a port can be changed by typing the new name and clicking on the Set button. The following

dot (.). Max length: 63 characters.
Lock #lock #unlock
The port can be locked to the currently connected output ports by adding a tick. If the port is locked, the
crosspoint state of this port cannot be changed.
Mute #mute #unmute

transmitted from the input port.
HDCP Mode #hdcp
▪ HDCP mode
the content allows when Auto mode is selected; #signaltype #hdcp
Output Options
Output 5V Enable
▪ 
transmitted signal.
Output Signal Type
▪ 
Embedded Audio Mute
Add a tick to turn off the embedded audio.
Frame detector
For more details, see the Frame Detector section.



