Lightware MMX2 Series User Manual

  

HDCP Setting (Output Port)
The maximum allowed HDCP encryption can be queried at each output ports. See more information in the
HDCP Management section.
ATTENTION!  HDCP 2.2 signal handling is limited when 3 outputs are available: O1 and O2 ports support

Command and Response #hdcp
ç <out><allowed_hdcp>
æ pr·/V1/MEDIA/VIDEO/<out>/HDCP.AllowedHdcpVersion=<allowed_hdcp>
Parameters
Parameter Parameter description  
<allowed_hdcp> The maximum allowed
HDCP encryption on the
output port
HDCP 1.4
HDCP 2.2


Example
ç 
æ 
Audio Port Settings
Switching Audio Input
Command and Response
ç <audio_in>:O3)
æ mO·
Parameters
Parameter Parameter description  
<audio_in> Audio input port
I1-I4
Audio input port number
Example
ç 
æ 
INFO:  
output.

Command and Response
ç GET·
æ pw·<audio_in>
Parameters
Parameter Parameter description  
<audio_in> Audio input port
I1-I4
Audio input port number
Example
ç 
æ 





Lightware MMX2 Series Specifications

General

Brand	Lightware
Model	MMX2 Series
Category	Matrix Switcher
Language	English