MMX2 series – User's Manual 81
Identifying the Device
Command and Response #identifyme
ç
æ
Example
ç
æ
Toggling the Dark Mode Setting
#darkmode
Command and Response
ç <mode_state>
æ <mode_state>
Parameters
If the <mode_state> parameter is true (or 1), the Dark mode function is enabled, if the parameter is false (or 0),
the function is disabled.
Example
ç
æ
Setting the Delay of the Dark Mode Setting
The Dark mode can be enabled right away, or after a certain time. Thus, the mode is enabled if no buttons
function of the button itself. The delay time can be set by this command.
Command and Response
ç <delay_time>
æ <delay_time>
Parameters
The <delay_time> parameter means seconds, and the default value is 60. If set to 0, no delay is applied,
and the Dark mode can be enabled immediately by the DarkModeEnable property. This delay affects to the
wakeFromDarkMode method as well.
Example
ç
æ
Video Port Settings - General
Switching Video Input
Command and Response
ç <in>:<out>)
æ mO·
Example
ç
æ
INFO:
output.
Switching an Input to All Outputs
Command and Response
ç <input>)
æ mO·/V1/MEDIA/VIDEO/XP:switchAll=
Example
ç
æ
Locking the Video Port
Command and Response
ç SET·<port><locked_state>
æ pw·/V1/MEDIA//XP/<port>.Lock=<locked_state>
Parameters
Parameter Parameter description
<locked_state>
true
The port is locked
false
The port is unlocked
Example
ç
æ
To Next Page
Loading...
Need help?
General
