Lightware MMX2 Series - System Commands; Setting the Device Label; Resetting the Device; Restoring the Factory Default Settings

  

System Commands
Setting the Device Label
INFO:  The device label can be changed to a custom text in the Status 
Request and Response #devicelabel #label
ɯ  <ip>
ɯ body: <custom_name>
ɮ header: 200·OK
ɮ body: <custom_name>

Example
ɯ  
ɯ body: MMX2room
ɮ header: 200 OK
ɮ body: MMX2room
Resetting the Device
The switcher can be restarted – the current connections will be terminated.
Request and Response #reboot #restart
ɯ  <ip>
INFO:  
ɮ header: 200 OK
Example
ɯ  
ɮ header: 200 OK
Restoring the Factory Default Settings
Request and Response
ɯ  <ip>
INFO:  
ɮ header: 200 OK
Example
ɯ  
ɮ header: 200 OK
The device is restarted, current connections are terminated, and the default settings are restored. See the
complete list in the Factory Default Settings section. #factory

Request and Response #rmwareversion
ɯ  <ip>
ɮ header: 200·OK
ɮ body: 
Example
ɯ  
ɮ header: 200 OK
ɮ body: 1.3.3b3
Control Lock

Request and Response #lockbutton #buttonlock
ɯ  <ip>
ɯ body: <lock_status>
ɮ header: 200·OK
ɮ body: <lock_status>
Parameters
Parameter Parameter description  
<lock_status> Front panel button
locking status
None
None: all functions of the front panel button are enabled.
locked
The front panel buttons are locked, and can be unlocked
by a button combination ().
force
locked
The front panel buttons are locked and cannot be unlocked
Status tab)

Example
ɯ  
ɯ body: force locked
ɮ header: 200 OK
ɮ body: Force locked



