Lightware MMX2 Series

 MMX2 series – User's Manual 60

Analog Audio Output Balance Setting by Steps
Request and Response
ɯ  <ip>
ɯ body: <step>
ɮ header: 200 OK
ɮ body: <step>
Parameters
The volume is increased or decreased by the given <step> value.
Example
ɯ  
ɯ  
ɮ header: 200 OK
ɮ body: OK
EDID Management

Request and Response #edid
ɯ  <ip>
ɮ header: 200·OK
ɮ body: ["<source>:E1";"<source>:E2";" <source>:E3;""<source>
Parameters
Parameter Parameter description  
<source> Source EDID memory place
F1-F120
Factory EDIDs
U1-U14
User EDIDs
D1-D2
Dynamic EDIDs
Example
ɯ  
ɮ header: 200 OK
ɮ  
Emulated EDID memory for input port is listed with the EDID number that is currently emulated on the input.

Request and Response
ɯ  <ip>
ɮ header: 200·OK
ɮ body: <validity>
Parameters
If the <validity> parameter is true, the EDID is valid. If the parameter is false, the EDID is invalid.
Example
ɯ  
ɮ header: 200 OK
ɮ body: true




