MMX2 series – User's Manual 39
GPIO
commands. Select a GPIO pin under the Port settings section; the settings (pin direction and input level) are
displayed on the port tiles as well. #gpio
INFO: Output level can be set only if the pin direction is set to Output. In case of input direction, the output
level setting and the Toggle button is not available.
Interval (only for Output directon)
Duration time and the Logic levelSet interval button.
1
GPIO pin name
2
GPIO port icon
3
Pin direction:
Input
Output
4
H: High level indicator
L
5
GPIO port number
GPIO1
P1
GPIO
H
3
4
OCS - Occupancy Sensor
of sensors exist: some send high level, some send low level to this input when the room is occupied. Active-
Input level
State value can be free or occupied, depending on the Sensor type setting and the Input level (e.g. when the
sensor type is Active high and the input value is high, the state reports 'Occupied').
Sensor type
occupancy.
#ocs
To Next Page
Loading...
Need help?
General
