Lightware SW4-TPS-TX240 - Connecting to a TCP Server; Setting the Delimiter Hex; Disconnecting from a TCP Server; Setting the TCP;IP Port Number of the TCP Server

  

TCP Message Recognizer
DIFFERENCE:  

                 

#tcprecognizer #message
Preparation
Step 1. 

Step 2. DelimiterHex and the TimeOut 
Step 3. 
Step 4. 
Working Method

▪ The set DelimiterHex
▪ The set TimeOut
DelimiterHex is detected
later, or the TimeOut parameter is set meanwhile, the data appears in the Rx, RxHex, Hash and ActiveRx,
ActiveRxHex, ActiveRxHash properties.
Setting the IP Address of the TCP Server
Command and Response
ç )
æ )
Parameters
The 
Example
ç 
æ 
MESSAGE
saved in Rx property
MESSAGE
MESSAGE
saved in ActiveRx property
ActiveRx property is cleared
ActiveProperty
Timeout
MESSAGE
saved in Rx property
MESSAGE
saved in ActiveRx property
ActiveRx property is cleared
ActiveProperty
Timeout
with delimiter
Time
Delimiter
MESSAGE
TimeOut
with timeout
MESSAGE
no timeout,
no delimiter
*

Command and Response
ç )
æ )
Example
ç 
æ 
Connecting to a TCP Server
Command and Response
ç 
æ 
Example
ç 
æ 
Disconnecting from a TCP Server
Command and Response
ç 
æ 
Example
ç 
æ 
Setting the Delimiter Hex
 

Command and Response
ç 
æ 
Parameters
The 
Example
ç 
æ 
...00PWR_0100...
Delimiter Delimiter
Stored string



