Setting an Action by Specifying a Direct Path
Command and Response
ç
æ
Parameters
The structure of the .
brackets for methods. The parameter is optional in case of certain methods.
Example
ç
æ
Setting an Action by Linking Another Action
Command and Response
ç
æ
Parameters
The
Example
ç
æ
Setting an Action by Linking a Macro
DIFFERENCE:
Command and Response
ç
æ
Parameters
The Macros section) or can
be queried by the GET /CTRL/MACROS.<id> command.
Example
ç
æ
Event Manager Tool Kit
Setting the Delay
In most cases, the Action is performed immediately after the Condition is detected. But sometimes a delay
Command and Response (summary)
ç
æ
ç
æ
ç
æ
Parameters
The
Delay type
no delay .ConditionTimeout
0
The Action will be lanuched
after the Condition is detected.
simple delay .ConditionTimeout If the Condition is detected, the
action will be launched after the
set time.
still true after
.ConditionTimeout
if is detected after the set time
again.
.ConditionEndCheck
true
continuously
true
.ConditionTimeout
continuously
the set time.
.ConditionEndCheck
true
.ConditionTimeoutContinuous
true
Delay
Condition = true
Condition = true
Condition = true
Condition = true
continously
true
still true after
simple delay
no delay
Perform the action
Perform the action
Delay
Delay
Perform the action
Condition = true
Perform the action
Time
To Next Page
Loading...
