Lightware SW4-TPS-TX240 - EDID Management; Querying the Validity of a Dynamic EDID; Querying the Emulated Edids; Setting the Output Level of a GPIO Pin

  


 
Setting the Direction of a GPIO Pin
Command and Response
ç .Direction(dir)
æ .Direction()
Parameters
  
  I O
Example
ç 
æ 
Setting the Output Level of a GPIO Pin
Command and Response
ç .Output(value)
æ .Output()
Parameters
  
  H L
Example
ç 
æ 
Toggling the Level of a GPIO Pin

Command and Response
ç 
æ 
Example
ç 
æ 
EDID Management

Command and Response #edid
ç 
æ )
Parameters


  
 The location of the emulated
EDID.
D1-D#: dynamic EDIDs
U1-U#
F1-F#
 section.
 The input port where the
above EDID is emulated.
E1-E#EDID
 section.
Example
ç 
æ 

Command and Response
ç 
æ .
Parameters
  
 The location of the EDID. D1-D#: dynamic EDID location
 

true
false
Example
ç 
æ 



