Details: WAH
6•6
around you, and that’s sometimes a nice thing. For this effect, the Wah Depth controls
the speed of the changes, from catatonic to can’t-get-no-faster. Displayed as 1-99 to
keep things simple.
5. Mod Assign – When is a wah pedal not a wah pedal? Whenever you’ve chosen
Wah Type 5, Mod Assign. This lets you use either an expression pedal connected to
the PEDAL 2 jack, or the Floor Board wah pedal, to modulate a selected AX2 setting.
For instance, you could set this up to control your Reverb Decay Time, and then
anytime you pressed forward on the Wah Pedal, your Reverb would get HUGE. Back
off on the pedal and things are back to normal.
The following settings are available for modulation:
5.0 Preamp Bass – same controls as the Main Row
5.1 Preamp Mid – same controls as the Main Row
5.2 Preamp Treble – same controls as the Main Row
5.3 EQ 80Hz
5.4 EQ 240Hz
5.5 EQ 750Hz
5.6 EQ 2200Hz
5.7 EQ 6600Hz
5.8 Presence
5.9 Tremolo Speed
5.10 Tremolo Depth
5.11 Delay Feedback
5.12 Delay Level
5.13 Chorus Speed
5.14 Chorus Feedback
5.15 Chorus Depth
5.16 Chorus Level
5.17 Reverb Decay
5.18 Reverb Level
5.19 Drive
5.20 Preamp Bass – same controls as the Main Row
5.21 Preamp Mid – same controls as the Main Row
5.22 Preamp Treble – same controls as the Main Row
5.23 Channel Volume
5.24 Delay/Reverb Level
To Next Page
Loading...
Need help?
General
