Foot Control: FLOOR BOARD
8•1
FOOT CONTROL
While the AX2 is certainly a way groovy thing all on its own, it really kicks into high
gear when you get a little custom foot control going. For live performance and in the
studio, you really get the most out of your AX2 with a foot controller. There are two
different foot controllers that can be used with your amp: Line 6’s
Floor Board and
FB4.
FLOOR BOARD
This all-steel chassis, oh-so-stylish foot control wonder gives you plenty of stuff: A
volume pedal. A wah pedal with a Crybaby-style toe-down on/off switch so you can
kick the wah effect in and out. Hands-free control for the AX2’s built-in chromatic
digital guitar tuner. Stomp box-style on/off control of your AX2’s effects. And easy
access to all of the AX2 Preset and User channels.
If you haven’t already discovered the back panel foldout, get set for a surprise. If you
have, go ahead and jump to the next paragraph. Still here? Alright – flip to the inside
back cover of this manual. Hmm, looks like the cover is all folded up. Unfold it, and
hey, presto! It’s your very own AX2 road map. The idea is to have this handy pictorial
reference always opened out while you’re breezing through this User Guide and
becoming an expert on all things AX2. The boxed numbers throughout the following
text refer to the fold out illustration.
GETTING CONNECTED
So, how’s that Floor Board work, exactly? Well, the very first thing is to plug it into
your AX2 with the handy cable that came with your Floor Board. We recommend you
turn the AX2 off first, but you do whatever you feel like – it’s your amp! Then, plug in
your guitar, turn on the AX2 (scared you, didn’t we?) and just press that Volume Pedal
on the far right side of the Floor Board ( ) all the way forward so you can hear
something.
27
To Next Page
Loading...
Need help?
General
