Foot Control: USING THE FB4 WITH THE AX2
8•8
USING THE FB4 WITH THE AX2
The FB4 gives you basic control over channel switching on the AX2. We tried to
make it as simple as possible. Turn off the AX2. Connect the FB4 to the AX2 with
the thoughtfully-included connection cable. Turn on the AX2. Select Channel A,
B, C, or D by pressing the appropriate button on the FB4. The channel’s light will
come on to indicate that the channel is selected. If you tap the button at the
selected channel two (or more) times, it will set the Tap Tempo speed for your
Delay effects. And finally, if you unplug the FB4 from your amp and tap on one of
its switches, nothing will happen.
To Next Page
Loading...
Need help?
General
