LINET Virtuoso - Use; Preparing the Bed for the Patient

Product: Virtuoso
Version: 02
14/37
9 Use
9.1 Preparing the Bed for the Patient
9.1.1 Preparation
 Inate mattress (see „Initial Operation“).
 Put a sheet loosely on the mattress if not prescribed otherwise by qualied personnel.
9.1.2 Putting the Patient into the Bed
 Lay patient on mattress.
For an ideal lying position:
 If additional blankets or sheets are used, make sure that ease of movement is sufcient.
 Ensure that blankets, sheets, clothing etc. do not cause pressure sores (e.g. due to creases, seams etc.).
 Do not place any additional sheets, blankets etc. between mattress and patient.
WARNING!
Risk of injury when putting patient into bed!
Before putting the patient into bed:
Ü
Ensure that mattress is completely and correctly inated.
Ü
Ensure that mattress is correctly secured with safety straps.
WARNING!
Danger of suffocation due to air-impermeable mattress cover!
Ü
Use mattress cover correctly.
Ü
The nursing staff are responsible for the safety of the patient on the mattress cover.
CAUTION!
Material damage due to dampness or contamination!
Ü
Ensure that no moisture gets into the mattress.
Ü
Ensure that no food or drink gets into the mattress.
Ü
If moisture, food or drink get into the mattress, notify LINET® Service.