LINET Virtuoso - Electromagnetic Compatibility

Product: Virtuoso
Version: 02
34/37
19.3 Electromagnetic Compatibility
The EMC declaration of compliance for Virtuoso covers the requirements of IEC 60601-1-2, in particular § 5.2.2.1.
If it is necessary to use the bed near electrical equipment:
 Observe whether the bed functions normally.
 If any abnormal properties are observed, move or relocate the bed.
NOTE Continuingalternatinginationwithoutexcessiveinationorpermanentdeationofthemattressisconsidered
the essential performance of Virtuoso.
Virtuoso is intended for the application in electromagnetic environment as specied below. The customer or user of the
bed is responsible for the fact that these requirements are met.
19.3.1 Electromagnetic Radiation
WARNING!
Increased electromagnetic radiation or reduced electromagnetic resistance due to unsuitable accessories,
converters or cables!
Ü
Consult LINET
®
or local dealer before using other parts than those provided by LINET
®
.
Ü
See Virtuoso spare parts list for details.
WARNING!
Material damage due to electromagnetic radiation!
Ü
Do not use the product in close proximity to:
 sources of radio frequency
 other equipment not approved according to IEC 60601-2-2:2007
 equipment whose performance affects this product
 equipment that is affected by electromagnetic elds radiating from this product
Radiation Test Conformity Electromagnetic Environment
High-frequency radiation
CISPR 11
Group 1 Virtuoso utilizes high-frequency energy for its internal
function only. The high-frequency radiations are very low
and unlikely to cause any interference to nearby electro-
nic devices.
High-frequency radiation
CISPR 11
Class B Virtuoso is suitable for all institutions, including house-
holds and objects directly connected to the public low-
-voltage mains supplying residential buildings.
Harmonic radiations IEC
61000-3-2
Class A
Fluctuating voltage/Flashing
radiation EC 61000-3-3
Conform