LINET Virtuoso - Maintenance; Storage

Product: Virtuoso
Version: 02
30/37
14 Maintenance
Check the following at least every 12 months:
 Check mattress, SCU and seat cushion externally and internally for mechanical damage and signs of seve-
re wear and tear.
 Check if mattress, SCU, seat cushion and air connector are fully operational.
 Perform electrical safety checks in accordance with local safety regulations.
Check the following every month:
 Check lter in top of SCU for dust and dirt.
 If dust or dirt are visible, replace lter.
 Replace any damaged parts immediately with original spare parts only.
 Ensure that maintenance and installation are performed only by qualied personnel trained by the manu-
facturer.
NOTE LINET®providesservicedocumentationforqualiedpersonnel.
15 Storage
When SCU is not in use:
 Switch off SCU using green illuminated power switch on side of SCU.
 Unplug mains cable.
 Wrap mains cable around SCU.
 Pack in suitable cover.
 Store in a place suitable for electronic medical devices.
When mattress is not in use:
 Deate mattress and leave air connector open (CPR position).
 Roll mattress up to get air out completely.
 Rotate end of umbilical air connector and main body in opposite directions.
 Pack in suitable cover.
 Store in a place suitable for electronic medical devices.