LINET Virtuoso - Technical Specifications; Mechanical Specifications; Electrical Specifications

33/37
Product: Virtuoso
Version: 02
19 TechnicalSpecications
19.1 MechanicalSpecications
19.2 ElectricalSpecications
Dimensions
 Mattress (inated)
 Seat cushion (inated)
 SCU (without battery)
 Battery pack
2,040 mm x 860 mm x 230 mm (80‘ x 33‘ x 9‘)
450 mm x 500 mm x 125 mm (17‘ x 19‘ x 4‘)
135 mm x 360 mm x 290 mm (5‘ x 14‘ x 11‘)
98 mm x 26 mm x 254 mm (3‘ x 1‘ x 10‘)
Weight
 Mattress (inated)
 Seat cushion (inated)
 SCU (without battery)
 Battery pack
9.5 kg (20,9 lbs)
2.5 kg (5,5 lbs)
3.5 kg (7,7 lbs)
0.8 kg (1,7 lbs)
Cycle
 Mattress (inated)
 Seat cushion (inated)
3 cells, 7.5 min
2 cells, 12 min
Environmental conditions (operation and storage)
 Temperature
 Humidity
 Atmospheric pressure
0 °C (32 °F) – +40 °C (104 °F)
30–75 %
700–1060 hPa
Max. load
 Mattress
 Seat cushion
254 kg (559 lbs)
127 kg (279 lbs)
Ination time
 Mattress
 Seat cushion
10 min–30 min
30 s
Deation time (CPR) Max. 30 s
Noise level NC30
Supply voltage
 Model 127 V
 Model 230 V
 Model 230 V with battery back-up
100-127 V, +/- 10%, 50-60Hz
220-240 V, +/- 10%, 50-60Hz
12 V DC (battery)
Nominal power
 Model 127 V
 Model 230 V
 Model 230 V with battery back-up
Max. 23 VA
Max. 20 VA
Max. 23 VA
Fuse
 Model 230 V
 Model 230 V with battery back-up
 Model 127 V
2x 1A(T) anti-surge fuse
2x T2(T) anti-surge fuse (250 V, type 5x20 mm)
2x 1A anti-surge fuse
Electrical safety class Class 2 with applied part type B
Electrical safety In conformity with EN 60601-1
Battery operation At least 6 h in APT mode