see also:
“How to optimize your router for gaming and voice” on page 34
“How to set up port forwarding” on page 43
“How to set up port range triggering for online gaming” on page 41
How to manually connect a network device
To manually connect a device to your network:
Follow the device’s instructions to connect it to your network. Use the connection information available in Linksys Smart Wi-Fi.
After the device connects to your network, log into Linksys Smart Wi-Fi, then click
Network Map
to confirm that your router recognizes the new device.
How to connect a network device using Wi-Fi Protected Setup
To connect a device using Wi-Fi Protected Setup™:
Plug in and turn on the network device.
Under
Wireless
, click the
Wi-Fi Protected Setup
tab.
Use one of the following methods to complete the setup:
If the device has a Wi-Fi Protected Setup button, press that button, then click the
Wi-Fi Protected Setup
button in Linksys Smart Wi-Fi or press the button on the side of your
router.
If the device has a Wi-Fi Protected Setup PIN, type that number into the
Device PIN
box in Linksys Smart Wi-Fi, then click
Register
.
If the device’s own setup asks for the router’s Wi-Fi Protected Setup PIN, enter the number that appears under Router PIN in Linksys Smart Wi-Fi.
To Next Page
Loading...
Need help?
General
