Under Select the type of device to add to your network, click
USB Printer
. The Add a USB printer screen opens.
<AddUSBPrinter.png>
Follow the on-screen instructions for downloading and installing the VUSB (virtual USB) software for your computer.
To connect a wireless printer to your network:
Follow the printer’s instructions to connect it to your network. Use the connection information available in Linksys Smart Wi-Fi.
After that printer connects to your network, log into Linksys Smart Wi-Fi, then click
Device List
to confirm that your router recognizes the new printer.
When you set up a wireless printer make sure that it supports the WPA/WPA2 wireless encryption standard.
If your wireless printer supports Wi-Fi Protected Setup, you should use Wi-Fi Protected Setup to connect the printer to your network. See “How to connect a network device using
Wi-Fi Protected Setup” on page 9.
How to connect other devices
Many other types of wireless network devices can connect to your home network, including
Game consoles
Internet-capable TVs and media players
Digital music players
Smartphones
Because of the wide variety of devices and methods of connecting, you must manually enter network information into the devices for a successful network connection.
TIP
For more instructions on connecting a game console to your network,
To Next Page
Loading...
