To restore your router configuration:
Log in to Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 4.)
Under Router Settings,
click Troubleshooting.
Click the Diagnostics tab.
Under Router configuration, click
Restore
. The Restore Router Configuration dialog box opens.
Click
Choose File
to navigate to the location of your configuration file, then select the file and click
Open
.
To restore the configuration, click
Start to Restore
.
How to upgrade the router’s firmware
Linksys may periodically publish a firmware upgrade either to fix a problem or to add features to your router.
IMPORTANT
Do not interrupt the upgrade process. You should not turn off the
router or press the Reset button during the upgrade. Doing so may
permanently disable the router.
TIPS
Your router automatically checks for available updates and installs
them by default. Use the following instructions only if the automatic
firmware update has been turned off.
To upgrade the router’s firmware, do the following:
Log in to Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 4)
Under Router Settings,
click Connectivity.
Click the Basic
tab.
Under Firmware Update, click
Check for Updates
.
If an available update is found, follow the on-screen instructions to install it.
To Next Page
Loading...
Need help?
General
