modem. If you are installing this router for the first time, reset your
modem before connecting the router to your modem. To reset your
modem, disconnect power for about one minute, and reconnect power.
To clone a MAC address from your computer, do the following:
Log into Linksys Smart Wi-Fi. (See “How to connect to Linksys Smart Wi-Fi” on page 4.)
Under Router Settings, click Connectivity. The Connectivity page opens.
Click the Internet Settings
tab.
Beside MAC Address Clone, click
Enabled
.
Enter the 12-digit MAC address of your old router, then click
Ok
.
How to connect to your corporate office using a VPN
A VPN (Virtual Private Network) uses a public network such as the Internet to provide secure communications between a remote computer and another network. Corporations often
provide VPN access to their networks to enable employees to work from remote offices or while traveling. Most corporate VPNs use the Internet.
For a typical VPN, the corporation installs a VPN gateway on their corporate network. Employees authorized to work remotely connect to the VPN gateway through the Internet using
VPN software and security methods provided by their employers. Security and authentication requirements ensure a secure connection and access by only authorized users.
The default VPN settings in your router have been configured to pass through (allow) the most common types of VPN protocols. Usually, no changes are needed.
To Next Page
Loading...
Need help?
General
