Click Settings. The Settings screen opens.
Set the maximum Downstream Bandwidth. If you set the bandwidth lower than the actual bandwidth of your router, performance may be limited.
Set the maximum Upstream Bandwidth.
To help manage traffic priority with devices that support WMM, turn on WMM Support.
TIP
WMM (Wi-Fi MultiMedia) Support is a wireless feature
based on the IEEE 802.11e standard. WMM improves quality
for audio, video, and voice applications by prioritizing
wireless traffic. This feature requires that the wireless client
devices in your network also support WMM.
To have the router resend data if an error occurs, turn off No Acknowledgement
.
CAUTION
If you specify a maximum bandwidth that is too high, the
router cannot apply priorities correctly, and prioritization
problems may result.
Click
Ok
.
How to enable Voice over IP on your network
VoIP (Voice over Internet Protocol) is a technology for using the Internet as an interface for telephone communications. To use VoIP, you need to get an account with a VoIP service
provider. The VoIP service provider typically provides you with a telephone adapter that connects to your network. If you do not use your network to make phone calls, you don’t
need to change the default settings.
The Application Layer Gateway SIP (Session Initiation Protocol) allows SIP packets, used by some VOIP service providers, to get through your router’s firewall.