Troubleshooting
This chapter can help you solve common setup issues and connect to the Internet. You can find more help from our award-winning customer support at
linksys.com/support/EA4500 V3.
Your router was not successfully set up
If Linksys Smart Wi-Fi did not complete the setup, you can try the following:
1.
Press and hold the Reset
button on your router with a paperclip or pin until the LED starts blinking (about 10 seconds). Install the router again.
insert diagram
2.
Temporarily disable your computer’s firewall (see the security software’s instructions for help). Install the router again.
3.
If you have another computer, use that computer to install the router again.
To Next Page
Loading...
