EasyManuals Logo

Linksys EA4500 V3 User Manual

Linksys EA4500 V3
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
INTERNET port
Connect an Ethernet cable to this yellow gigabit (10/100/1000) port, and to a broadband Internet cable/DSL or fiber modem.
NOTE
For best performance, use CAT5E or higher rated cables on the Ethernet ports.
Wi-Fi Protected Setup™ button
Press to configure wireless security on Wi-Fi Protected Setup-enabled network devices.
USB 2.0 port
Connect and share USB drives on your network or on the Internet.
Reset button
Press and hold for 10 seconds (until the power LED
starts flashing) to reset the router to factory settings. You can also restore the factory settings using Linksys Smart Wi-Fi on the Internet or mobile app.
Power port
Connect the included AC power adapter.
Power switch
Press to turn on the router (European only).
Top view

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Linksys EA4500 V3 and is the answer not in the manual?

Linksys EA4500 V3 Specifications

General IconGeneral
Wireless Standard802.11a/b/g/n
Frequency Bands2.4 GHz, 5 GHz
Ethernet Ports4 x Gigabit LAN, 1 x Gigabit WAN
USB Ports1 x USB 2.0
Antenna TypeInternal
RAM128 MB
Flash Memory128 MB
Wireless SpeedUp to 450 Mbps per band
Security FeaturesWPA2, SPI Firewall

Related product manuals