65
Chapter 5: Using the Web-based Utility for Configuration
Spanning Tree Tab - STP Port Settings
24-Port 10/100/1000 Gigabit Switch with Webview and PoE
timeout problems. However, remember that Edge Port should only be enabled for ports connected to an end-node
device. (Default: Disabled)
Administrative Link Type. The link type attached to this interface.
• Point-to-Point – A connection to exactly one other bridge.
• Shared – A connection to two or more bridges.
• Auto – The Switch automatically determines if the interface is attached to a point-to-point link or to shared
media. (This is the default setting.)
To Next Page
Loading...
Need help?
General
