Lite-On Technology Corp.
Industrial Automation
108
Refer to PA-09.
Internal Speed Command 1/Internal Speed Limit
1
Communication
address:
001CH
001DH
Internal Speed Command 1: The setting of the internal torque command in the first segment (SPD0,SPD1) =
(1,0).
Internal Speed Limit 1: The setting of the internal torque limit in the first segment (SPD0,SPD1) = (1,0).
Internal Speed Command 2/Internal Speed Limit
2
Communication
address:
001EH
001FH
Internal Speed Command 2: The setting of the internal torque command in the second segment (SPD0,SPD1) =
(0,1).
Internal Speed Limit 2: The setting of the internal torque limit in the second segment (SPD0,SPD1) = (0,1).