Livescribe™ Smartpen User Guide 59
Using Quick Commands
Guidelines for Writing a Math Problem:
• Numbers can contain up to 12 characters, including a decimal point.
• Operators can include +, -, ×, *, /, and ÷.
• You can double-tap instead of writing the equals sign.
Example: 52 - 14 followed by a double-tap is an accepted entry.
N
OTE: If the length of the math problem exceeds the display size, the beginning of the problem scrolls
off the left of the display as new characters are added to the right.
5. Your smartpen will prompt you to write a
problem.
6. Write a basic math problem, such as 51 x 3 =
7. Your smartpen will display the result.
8. Once you have written a Quick Command, you
can tap where you wrote it to repeat the
command.
To Next Page
Loading...
