Livescribe Smartpen - Jumping Forward and Backward; Speed Jumping; Jumping to a Position; Changing Playback Speed

Livescribe™ Smartpen User Guide 77
Controlling Session Playback
Jumping Forward and Backward
You can jump back or forward 10 seconds in an audio file by tapping on the Jump controls .
Speed Jumping
Tap and hold down the Jump Back or Jump Forward button to continuously jump through
an audio file. As you continue to speed jump
, the length you jump increases.
Jumping to a Position
If you want to quickly jump to the beginning, end, or any position within an audio session, use the
Jump to Position bar.
• Tap anywhere on the position bar to jump to the corresponding position in the audio file.
• Tap the 0% button to jump directly to the beginning of the current audio session.
Changing Playback Speed
If you want to speed listen to the audio file or slow the audio session to replay a specific moment, use
the Playback Speed controls
.
• To slow down the audio from normal speed, tap the Slow Down Audio button. Tap repeatedly
to keep slowing down audio speed.
• To speed up the audio from normal speed, tap the Speed Up Audio button. Tap repeatedly to
keep increasing the playback speed.
• To return to normal speed—the speed at which the audio was recorded—tap the Normal Audio
Speed
button.