Livescribe™ Smartpen User Guide 80
Annotating - Linking Notes to Pre-Recorded Sessions
N
OTE: If recording the paperless session was the last action you took with the Livescribe smartpen, you
can also access the session by tapping on the 0% point of the paper control position bar.
Annotating - Linking Notes to Pre-Recorded Sessions
You can write new notes and link them to a previously recorded audio file by writing on dot paper while
you play back the audio recording. Your recorded audio can be already linked to your notes, or
paperless (see
Recording Paperless (Audio Only) Sessions on page 79). This feature is very useful
when you need to clarify or expand on your notes later. For example, you may need to go back to your
no
tes to correct or clarify a point made in a meeting or lecture. Those written corrections are linked to
your original recorded audio.
To link notes to previously-recorded audio:
1. Start audio playback by tapping on your partially written notes or using Nav Plus to play a
previously-recorded session.
2. After you start playback, begin writing with the Livescribe smartpen. Your smartpen automatically
links your new notes to your previously recorded audio.
3. Stop playback.
4. Tap on your newly written notes to play back the audio that you linked while writing the new notes.
To Next Page
Loading...
