Livescribe Smartpen - Using the Paper Replay Application

Livescribe™ Smartpen User Guide 67
Launch Line and Tap Around
Launch Line and Tap Around
Using Launch Line is similar to Quick Launch. You can use Launch Line to quickly launch any Open
Paper application installed on your smartpen. Open Paper applications are applications that do not
require pre-printed paper controls to function. Examples of these applications are Piano, Translator
Demo, and most applications on the Livescribe Online Store.
Tap around is a feature of Launch Line that is
an alternative to using the Nav Plus to navigate menus
of an application.The areas immediately surrounding a Launch Line function as the Nav Plus controls:
Tap Up, Tap Down, Tap Left, Tap Right, and Tap Center.
The tap-around regions correspond to the feature
s and regions of the Nav Plus, except that:
• Tap around controls menus and navigation within its corresponding application only.
• You cannot use tap around controls to launch other applications.
To create and use Launch Line and tap around:
6. Once you have written a Quick Command, you
can tap where you wrote it to repeat the
command.