LONGER LK4 X - 3.2. Home interface

www.longer3d.com support@longer3d.com
16
3.2. Home interface
Home
Tune
Restore
Restore default setting
Step
Nozzle flow step size
z-offset
Fine-tune the distance from the nozzle to the hot bed
Filament
Nozzle temp
Display the temperature of nozzle
Heatbed temp
Display the temperature of hot bed
Filament type
Select the filament to preheat nozzle and hot bed
Cool
Stop heating and cool the nozzle or hot bed
Filamentchange
Feeding/returning length control
Load\Unload
Feeding/returning control
Leveling
Manual
Leveling the hot bed manually
Automatic
Leveling the hot bed by 3D touch or BL touch
About
About the firmware version of printer motherboard and touch screen,
machine model, used time, etc.