LONGER LK4 X - 3. Machine operation; 3.1. Machine control interface description

www.longer3d.comsupport@longer3d.com
15
3. Machine operation
3.1. Machine control interface description
Primary
interface
Secondary
interface
Function control
Explain
Home
Move
X, Y
Move and home the X, Y axis
Z
Move and home the Z axis
E
Load and unload the filaments
Distance
Moving distance
Disable
Unlock the motor
Enable
Lock motor
File
File selection and
display
Open
Start printing
Tune
Nozzle Temp.
Increase\decrease
Adjust the nozzle Temp.
Cool
Stop heating and cool the nozzle
Step (
℃
)
Temp. adjust step size
Heatbed Temp.
Increase\decrease
Adjust the hotbed Temp.
Cool
Stop heating and cool the hotbed
Step
（℃）
Temp. adjust step size
Fan speed
Increase\decrease
Adjust fan speed
Stop fan
The fan stops rotating
Step
Step speed of the fan speed
Feed rate
Increase\lower
Adjust print speed
Restore
Restore default setting
Step
Print speed step size
Tune
Nozzle flow rate
Increase\decrease
Adjust the nozzle flow