Look-C H424 - Cable Connection; WES Cables

To Next Page

To Previous Page

LOOK-C INSTRUCTIONS

RVVP 4 x 0.5mm

1. Connect RVVP 4 cable

2. Connect RVV 3 + SYV cable

RVV 3 x 0.75mm

SYV75-3

[1]

[2]

3Y(Yellow)

4B(Black)

2W(White)

1R(Red)

1. Connect CAT5/CAT6 cable Twisted-Pair

3Y(Yellow)

4B(Black)

2W(White)

1R(Red)

[1] Connect the shielded layer of the cable to the 2W wire. [2] All the jointers should be weldded with an iron.

Connect the cable to the 4 pin connector, the joint should be soldered with an iron.

WES Cables

Manufacturers Recommended Cables

2. Connect Security Cable SEC7505 - Shielded for noisy environments

Combine Red & Brown wires for Power

Combine White & Green wires

with shield for Common Ground

Use Screw Terminals

Or Solder & Heatshrink

3Y(Yellow) Video Composite

4B(Black) Audio & Control

2W(White) Ground Common

1R(Red) Power 12Vdc

Combine spare wires together for Power AWG

Combine All Twisted pair wires for Common Ground