Need help?Do you have a question about the Lorentz PSk3-15 and is the answer not in the manual?
General| Rated Power | 15 kW |
|---|---|
| Max. Input Voltage | 1000 V |
| Output Voltage | 3/N/PE 230/400 V |
| Frequency | 50 Hz / 60 Hz |
| Efficiency | 98.1% |
| Protection Class | IP65 |
| Output Power | 15000 W |
| Protection | Overvoltage, overcurrent, short circuit |
Steps for installing the PV array and the controller unit.
Instructions for wiring the pump and accessories to the controller.
Guidelines for installing submersible and surface pumps.
How to configure system features using the LORENTZ Assistant app.
Explanation of various warning symbols used in the manual.
Consequences of ignoring safety directions and symbols.
Adherence to safety directions, regulations, and internal guidelines.
General safety precautions for operators and users regarding equipment parts.
Safety guidelines for performing maintenance, inspection, and assembly tasks.
Instructions for wiring the PSk3 controller, including warnings.
Instructions for wiring various pump accessories to the controller.
Wiring instructions for hybrid operation (solar and AC).
Explanation of the necessity and purpose of grounding the system.
Procedures for connecting the protective earth connection to the controller and motor.
General warnings and precautions for pump installation.
Installation procedures specific to submersible pumps.
Instructions and warnings for wiring the submersible pump.
Steps for connecting the pump end and motor, and securing the pipe.
Installation procedures specific to surface pumps.
Guidelines for placement, foundation, and mounting surface pumps.
Instructions for connecting the motor cable for surface pumps.
Crucial steps for initial pump start-up and filling.
Procedures for filling the pump and suction pipe with water.
Using a float switch to prevent tank overflow and stop the pump.
Information on the PV Disconnect box with an integrated disconnect switch.
Functionality and components of the SmartStart system for generator control.
Detailed description of the PSk3 controller's LED indicators and their meanings.
Step-by-step instructions for starting the pump correctly.
How to configure PSk3 controller parameters using the LORENTZ Assistant app.
Overview of the LORENTZ Assistant app for system configuration and monitoring.
Checklist and common causes for a pump not running.
Reasons why the pump may attempt to restart repeatedly.
Key aspects of inspection and maintenance for surface pump motors and cooling fans.
To Next Page
